Bowers & Wilkins CDA-16 Distribution Power Amplifier with 16 Channels

Rs. 325,000.00

Tax included

UP TO 50% OFF – Massive Extra Savings on This Product! Call Now or WhatsApp!

Free Shipping (India)
Brand New Unit(s)
Price Includes GST
Official Manufacturers Warranty
EMI Payment Option Available

Free Gift Offer

Color: Black

Bowers & Wilkins CDA-16 Distribution Power Amplifier with 16 Channels

Product variants

No-Cost EMI Offer

Discover the Freedom of Zero-Cost EMI on Purchases above ₹30,000.

Warranty Information

Experience the Peace of Mind with Official Manufacturers Warranty on Every Product.

Delivery and Shipping

In general, orders are delivered within 4-6 days. However, in some cases there might be a slight delay.

Description

Bowers & Wilkins CDA-16 Distribution Amplifier

Ensure the best possible sound from your in-wall or in-ceiling Custom Installation loudspeakers with Bowers & Wilkins' powerful yet compact distribution amplifier.

Distribution Amplifier

The power to impress

Bowers & Wilkins' 16-channel distribution power amplifier can drive a mix of in-ceiling or in-wall speakers in up to eight rooms simultaneously, all from one compact, effcient component.

Mighty flexible

CDA-16

Bowers & Wilkins' CDA-16 distribution power amplifier can drive any Bowers & Wilkins custom installation speaker to new heights of performance. Offering 16 channels of power, the CDA-16 can enable your whole home with sound yet takes up minimal space thanks to its compact 1U design. Its configurable specification supports bridging of its Class D stereo channels into even more powerful mono outputs, if needed.

Additional Information

Specifications

Load impedance range	>3Ω per channel (>6Ω in bridge mode)
Output Power per channel, non-clipped	>50W into 8Ω >100W into 4Ω
Output Power bridge mode, non-clipped	>200W into 8Ω
Output Power total, all channels	>400W short term >200W continuous average
DC offset voltage	<50mV
Frequency Response (-3dB)	<10Hz to >50kHz, any load impedance
Frequency response accuracy 20Hz-20kHz	±0.5dB
Signal to Noise ratio (Ref. 50W/8Ω)	>100dB A-Weighted
THD+N (1kHz, 12.5W, 4Ω)	typically 0.05%
Voltage Gain	34.9dB to - infinity, adjustable
Input impedance	15KΩ
Maximum input voltage	6.8V peak (4.8V rms sine wave)
Signal sense threshold	2.5mV (independent of Gain setting)
Wake-up time	<0.2s (If other zones active) <2s (From all zones inactive)
Turn-off time	15 minutes from last signal detected
12V trigger input threshold	typically 3V (recommended input is 5-15V)

Front panel	1 x Power LED (unit active – White, Fault – Red) 8 x Zone status LEDs (Signal present – White, Fault – Red)
Rear panel	8 x 2-position DIP switches (link to global input) 1 x 3-position switch (power mode: on, auto detect, 12V trigger) 8 x input gain control with Clip indicator LEDs

Input	8 x RCA (pair) Phono socket, line in (global in shared with Zone 8)
Output	1 x RCA (pair) Phono socket (global out) 8 x 5.08mm Pitch 4-way Phoenix Combicon style
12V trigger control	1 x 3.5 mm jack - 12V trigger IN 1 x 3.5 mm jack - 12V trigger OUT (Maximum 100mA pass-through)

Power consumption	<0.5W All zones inactive <45W All zones idling 300W maximum average 1,000W peak
AC supply	100-240V 50/60Hz
AC inlet	IEC C14, switched

Thermal dissipation	1.7 BTU/hr (standby), 150 BTU/hr (Idle), 400 BTU/hr (max)

Height x Width x Depth	44.5 mm (1.8in) 1U [55.5 mm (2.2in) plus feet] x 437 mm (17.2in) x 310 mm (12.2in)
Net weight	44.5kg (9.9lb)
Finish	Black

Audio Specifications

Load impedance range
>3Ω per channel (>6Ω in bridge mode)

Output Power per channel, non-clipped
>50W into 8Ω
>100W into 4Ω

Output Power bridge mode, non-clipped
>200W into 8Ω

Output Power total, all channels
>400W short term
>200W continuous average

DC offset voltage
<50mV

Frequency Response (-3dB)
<10Hz to >50kHz, any load impedance

Frequency response accuracy 20Hz-20kHz
±0.5dB

Signal to Noise ratio (Ref. 50W/8Ω)
>100dB A-Weighted

THD+N (1kHz, 12.5W, 4Ω)
typically 0.05%

Voltage Gain
34.9dB to - infinity, adjustable

Input impedance
15KΩ

Maximum input voltage
6.8V peak (4.8V rms sine wave)

Signal sense threshold
2.5mV (independent of Gain setting)

Wake-up time
<0.2s (If other zones active)
<2s (From all zones inactive)

Turn-off time
15 minutes from last signal detected

12V trigger input threshold
typically 3V (recommended input is 5-15V)

CONTROLS & INDICATORS

Front panel
1 x Power LED (unit active – White, Fault – Red)
8 x Zone status LEDs (Signal present – White, Fault – Red)

Rear panel
8 x 2-position DIP switches (link to global input)
1 x 3-position switch (power mode: on, auto detect, 12V trigger)
8 x input gain control with Clip indicator LEDs

CONNECTORS

Input
8 x RCA (pair) Phono socket, line in (global in shared with Zone 8)

Output
1 x RCA (pair) Phono socket (global out)
8 x 5.08mm Pitch 4-way Phoenix Combicon style

12V trigger control
1 x 3.5 mm jack - 12V trigger IN
1 x 3.5 mm jack - 12V trigger OUT (Maximum 100mA pass-through)

POWER

Power consumption
<0.5W All zones inactive
<45W All zones idling
300W maximum average
1,000W peak

AC supply
100-240V 50/60Hz

AC inlet
IEC C14, switched

THERMAL

Thermal dissipation
1.7 BTU/hr (standby),
150 BTU/hr (Idle),
400 BTU/hr (max)

DIMENSIONS

Height x Width x Depth
44.5 mm (1.8in) 1U [55.5 mm (2.2in) plus feet] x 437 mm (17.2in) x 310 mm (12.2in)

Net weight
44.5kg (9.9lb)

Finish
Black

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Free shipping

Across India on all orders
Best prices

On quality products.
Easy returns

Hassle free return policy
Quality products

Finest international brands

10 REASONS TO SHOP WITH US

Discover why we are your ultimate destination for all things audiovisual.

Learn More