10 REASONS TO SHOP WITH US
Discover why we are your ultimate destination for all things audiovisual.
1
of
12
Loading...
Emotiva XPA-11 Gen3 - 11 Channel Audiophile Power Amplifier
Rs. 350,000.00
Unit price
/
Unavailable
Tax included
Emotiva XPA-11 Gen3 - 11 Channel Audiophile Power Amplifier is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
No-Cost EMI Offer
No-Cost EMI Offer
Discover the Freedom of Zero-Cost EMI on Purchases above ₹30,000.
Warranty Information
Warranty Information
Experience the Peace of Mind with Official Manufacturers Warranty on Every Product.
Delivery and Shipping
Delivery and Shipping
In general, orders are delivered within 4-6 days. However, in some cases there might be a slight delay.
Emotiva XPA-11 Gen3 - 11 Channel Audiophile Power Amplifier
Rs. 350,000.00
Unit price
/
Unavailable
Description
Description
Sound Quality First Designed first and foremost to sound superb in all types of audio systems with all types of music. Overview
The power amplifier performs the simple but critical job of boosting the output signals from each channel of your stereo preamp or surround sound processor to the level necessary to drive your loudspeakers. While this may seem trivial, a really good power amp is essential to having a great audio system, because any flaws in the performance of your power amp are going to limit the performance of your entire system. Every amplifier in the new Third Generation XPA series was carefully designed to deliver superb technical performance, unsurpassed sound quality, and an exceptionally accurate and dynamic rendition of all types of music, thus ensuring that your entire system will sound its absolute best. Each individual XPA amplifier is modular, and can be customized to provide exactly the power and number of channels you need today, and expanded later if your needs change; and multiple matching chassis enable you to add even more channels, or more power, for a near endless variety of options.Emotiva XPA-11 Gen3 - 11 Channel Audiophile Power Amplifier
Low noise, low distortion, wideband amplifier design with traditional Class A/B output stage ensures smooth, detailed sound, without a trace of strain or harshness.
Totally stable with real world speakers in real systems; not just on a test bench.
Additional Information
Additional Information
Circuit Topology The XPA-11 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection. The XPA-11 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS). Audio Specifications The XPA-11 Gen3 features three of our High-Powered Single Channel Modules and four of our Stereo Modules. Audio Specifications (Five High-Powered Single Channel Modules) Audio Specifications (Stereo Modules): Input And Output Connections Power Requirements Front Panel Controls and Indicators Rear Panel Controls Protection MechanicalSpecifications
Power Output
300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven. 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven. 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven. 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load)
20 Hz to 20 kHz (+ / – 0.1 dB).
Broad Band Frequency Response
5 Hz to 80 kHz +0/-2 dB.
THD + noise
< 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.
Signal to Noise Ratio (8 Ohm load)
> 115 dB; ref FTC rated power; unbalanced input (A-weighted). > 86 dB; ref 1 watt; unbalanced input (A-weighted).
Minimum Recommended Load Impedance (per channel)
4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).
Damping Factor (8 Ohm load)
> 500.
Input Sensitivity (for rated power; 8 Ohm load)
1.5 V.
Gain
29 dB.
Maximum Power Consumption
2,600 watts. Note: The values shown refer to the amount of power the amplifier would consume while playing test tones continuously, on all channels, at full power, into a load bank. Therefore they are not at all characteristic of what you would expect when playing music or the sound track from a movie. Normal audio signals are dynamic, so the amount of power they require from second to second varies widely, and the average is far lower than this. With normal content, even playing very loudly, one of our amplifiers will consume far less power than indicated in the chart, so these values should not be considered to be a circuit requirement for normal operation.
Input Impedance
33 kOhms (balanced). 23.5 kOhms (unbalanced).
Power Output
65 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven. 100 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven. 65 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven. 100 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load)
20 Hz to 20 kHz (+ / – 0.1 dB).
Broad Band Frequency Response
50 Hz to 80 kHz +0/-1.5 dB.
THD + noise
< 0.02%; at 60 watts RMS; 1 kHz; 8 Ohms
Signal to Noise Ratio (8 Ohm load)
> 105 dB; ref FTC rated power; unbalanced input (A-weighted). > 85 dB; ref 1 watt; unbalanced input (A-weighted).
Minimum Recommended Load Impedance (per channel)
4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).
Damping Factor (8 Ohm load)
> 500.
Input Sensitivity (for rated power; 8 Ohm load)
0.8 V (800 mV).
Gain
29 dB.
Input Impedance
33 kOhms (balanced). 23.5 kOhms (unbalanced).
Input Connections
(High-Powered Single Channel Modules): Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.
Input Connections (Stereo Modules)
2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable.
Speaker Output Connections
Audiophile grade, gold plated, 5-way binding posts.
Trigger
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 120 mA.
Power Requirements
Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).
Standby
push button (halo ring changes color to indicate Standby or On).
Status LEDs
one per channel; blue. Status LEDs change to red to indicate a fault condition.
AC Power switch
rocker switch (switches AC main power).
Status LEDs switch
disables front panel Status LEDs and dims Standby button halo.
Input selector switches (one per channel)
metal toggle switches; select between balanced and unbalanced inputs.
Circuit Breaker
press button to reset circuit breaker.
Protection
The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Dimensions
17” wide x 8” high x 19” deep (unboxed; including feet). 17” wide x 7” high x 19” deep (unboxed; without feet). 24-1/2” wide x 12” high x 24-3/4” deep (boxed).
Weight
53 lbs (unboxed). 58 lbs (boxed).
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Learn More
