10 REASONS TO SHOP WITH US
Discover why we are your ultimate destination for all things audiovisual.
Pro-Ject Debut III Phono BT (OM5E) - Bluetooth Turntable (Belt Drive) (Wood) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Discover the Freedom of Zero-Cost EMI on Purchases above ₹30,000.
Experience the Peace of Mind with Official Manufacturers Warranty on Every Product.
In general, orders are delivered within 4-6 days. However, in some cases there might be a slight delay.
Debut III is back! …and now in the form of Debut III Phono BT. Debut III is the design that made Pro-Ject famous in the late 90s with thousands upon thousands sold worldwide. It was a time when discerning listeners were dissatisfied with settling for the then-prevailing compact disc, and when audiophiles were looking for an affordable way to get their vinyl spinning again.
The Debut design features a solid MDF plinth, TPE motor suspension, 8.6″ one-piece aluminum armtube and a high-mass steel platter over an anti-resonant sub-platter. Critical elements were designed and machined with precision and care. The goal here is the simplest possible design that focuses solely on the sound-enhancing aspects of a record player.
Debut III Phono BT implements a built-in MM phono preamp that also sends a Bluetooth signal to nearby receivers (a long-awaited feature in the Debut lineup). Importantly, the phono stage can be bypassed, meaning you can choose when to engage it based on your application. If you already use a phono preamp that you enjoy, simply use the PHONO OUT jacks (LINE OUT recruits the preamp). Use PHONO OUT if your amplifier/receiver has a PHONO input that you’re using. The most common application for the built-in phono preamp is for use with systems that lack a phono preamp. This allows you to connect your player directly to any line-level input so that you can listen in a huge array of contexts.
Debut III Phono BT implements a built-in MM phono preamp that also sends a Bluetooth signal to nearby receivers (a long-awaited feature in the Debut lineup). Importantly, the phono stage can be bypassed, meaning you can choose when to engage it based on your application. If you already use a phono preamp that you enjoy, simply use the PHONO OUT jacks (LINE OUT recruits the preamp). Use PHONO OUT if your amplifier/receiver has a PHONO input that you’re using. The most common application for the built-in phono preamp is for use with systems that lack a phono preamp. This allows you to connect your player directly to any line-level input so that you can listen in a huge array of contexts.
Pro-Ject is proud to implement a sound-first design that also allows maximum compatibility with the current landscape of gear on market. Debut III Phono BT includes a dust cover and is available in gloss black or real walnut veneer. The same speed controller/stabilizer used with Debut Carbon EVO is also used here. The switch is at the front/left/bottom corner of the plinth for clean aesthetics and toggles between 33 & 45rpm (78rpm is also an option – see below). The classic Ortofon OM 5e phono cartridge is factory-mounted and aligned. Everything you need to get started is in the box! With the OM5e, keep in mind that the Ortofon 78 stylus is also required for 78rpm discs.
Sumiko Most Debut owners are already aware of Acryl it – a stylish acrylic record platter that elevates the performance of all Debut variants via resonance control. Now you can further upgrade the platter assembly with Pro-Ject’s Debut Alu Sub-Platter – a higher-precision design that adds mass to the drive system, thus delivering improved speed stability and even more resonance control than Acryl it alone. Whether you own the new Debut Carbon EVO, Debut Carbon DC, Esprit, RecordMaster, or even the older Debut III (among others!), your analog system stands to benefit from the Debut Alu Sub-Platter.
Debut III Phono SB ships with 2 different belts. The flat belt is for 33 & 45rpm discs and is installed on the top/smaller diameter of the motor pulley. The round one is for 78rpm records only. It is designed for use with the larger/bottom pulley diameter with the differently shaped slot. Installing the 78rpm belt incorrectly compromises its integrity and may lead to breakage.
Debut III Phono SB ships with 2 different belts. The flat belt is for 33 & 45rpm discs and is installed on the top/smaller diameter of the motor pulley. The round one is for 78rpm records only. It is designed for use with the larger/bottom pulley diameter with the differently shaped slot. Installing the 78rpm belt incorrectly compromises its integrity and may lead to breakage.
Additionally, please note that it’s also not advisable to play 78rpm records with the 5e stylus. Being an elliptical diamond meant to track the ‘microgrooves’ of 33s & 45s, it will sound poor and cause undue harm to disc (and potentially the cartridge!). Ortofon offers their 78 stylus for this purpose. The stylus will track the grooves properly and reduce the risk of harm to your collection. Keep in mind that OM5e is a stereo MM phono cartridge setup, meaning that its normal job is to unveil 2 channels (left and right) of musical information. When using the 78 styli, what you’ll hear is the one channel of musical information (mono) of the 78 in both stereo channels.
Debut III Phono BT Overview
Upgrade Your Debut Turntable
Considerations for 78rpm Records
Features
Specs
Phono Preamp Specs
Phono Cartridge Specs
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.